Molecular Formula：(CH2-CHCI-CH2-CH2)n
Cas No.: 63231-66-3
Packing:25kg, 500kg, 1000kg/bag
Properties
CPE 135A is mainly used as an impact modifier for hard PVC products. Under correct processing conditions, the addition of CPE135A will result in the formation of a three-dimensional mesh structure in hard PVC products. So even in low-temperature environments, hard PVC products can maintain good impact resistance.
Application
Used as an impact modifier for PVC hard products, such as:PVC profiles, PVC pipes, PVC pipe fittings, PVC wall panels, PVC buckle plates, PVC fences, wood plastic composite materials.
Storage
Keep container tightly closed in a cool, well-ventilated place.
The recommended max. storage life is 2 years when stored under normal conditions.
|
ITEM |
INDEX |
|
Appearance |
White powder |
|
Chlorine content，% |
35±2 |
|
Apparent density（g/cm3） |
0.5±0.1 |
|
Sieve residue(0.9mm)，% |
≤0.2 |
|
Volatile，% |
＜0.4 |
|
Remnants(750℃)，% |
≤5.0 |
|
Tensile Strength（MPa） |
≥8.0 |
|
Elongation at break，% |
≥800 |
|
Hardness shore A |
≤57 |
Pigments
Accelerators
Rubber Antioxidants
Light Stabilizers
Foaming Agents
Plastic Antioxidants
Lubricants
Cellulose Ethers
PVC Heat Stabilizers
Surfactants
Chelating Agents
Optical Brighteners
PVC Processing Aids
Fillers
Coating Additives
Styrene-Acrylic Emulsion
Water-based Coatings 
Building Materials 
Shoe Materials
Plastics
Rubber
Water Treatment
Ultra-light Clay
Daily Chemicals
Oilfield and Lubricant 
Food