Properties
Light yellow powder with a little bitter, no poison. The density is 1.70, the decomposable temperature is 300οC. Soluble in chloroform, acetone, partly soluble in benzene, ethanol, CCl4, insoluble in gasoline, water and ethyl acetate. Decomposion when meeting strong acid and strong alkali
Application
Used for NR,IR,SBR,NBR, EPDM and latex. May be regarded as an intermediate between M and DM. Used as a secondary accelerator in combination with PZ and EZ. Similar performance as MBT at curing temperature in dry rubber application. Has lower scorch and better processing safety. Suitable for mold curing. Require zinc oxide and stearic acid as activators in many kinds of rubber batch. Easily disperses in rubber; yields non-staining and non-discoloring products. Mainly used in the manufacture of latex products, foam rubber, latex coating gloves, etc.
Packaging
25kg /bag
Storage
Keep container tightly closed in a cool, well-ventilated place.
The recommended max. storage life is 2 years when stored under normal conditions.
|
ITEM |
INDEX |
|
Appearance |
Light yellow powder |
|
Loss on drying % |
≤0.50 |
|
Zinc content % |
16.0-22.0 |
|
Free M % |
≤5.0 |
|
Residue on 150μm sieve % |
≤0.10 |
|
Additive % |
1.0-2.0 |
Pigments
Accelerators
Rubber Antioxidants
Light Stabilizers
Foaming Agents
Plastic Antioxidants
Lubricants
Cellulose Ethers
PVC Heat Stabilizers
Surfactants
Chelating Agents
Optical Brighteners
PVC Processing Aids
Fillers
Coating Additives
Styrene-Acrylic Emulsion
Water-based Coatings 
Building Materials 
Shoe Materials
Plastics
Rubber
Water Treatment
Ultra-light Clay
Daily Chemicals
Oilfield and Lubricant 
Food